L15 Lock and Tooling
(go to: L20 Lock and Tooling)
This section shows the part numbers for L15 locks and their tooling.
(Pricing is being updated.) To learn about the capabilities of locks,
please review the Locks page.
Important note: Our part numbers reflect a package
quantity. Example: If you order L15B-10, you would receive a package
of 10 pieces of the L15 bottom lock.
(If you are from outside the US, please contact us. We
ship direct to the US but have stocking distributors in other countries.)
Locks:
L15B, L15S
Drill Bits:
L15DB
Tooling:
Drill stops, Drill Jig Set
Kit: L15K
L15 Bottom Locks
| Part
# |
|
| L15B-10 |
|
| L15B-25 |
|
| L15B-50 |
|
|
L15 Surface Locks
| Part
# |
|
| L15S-10 |
|
| L15S-25 |
|
| L15S-50 |
|
|
Tough Duty Drill Bit Set for L15 Locks
| Part# |
Qty
& Description |
|
| L15DB |
3 each of
fractional sizes 3/32" and 3/16" drill bits |
|
Tough Duty drill bits are made of high quality tool steel and
heat-treated to higher hardness. These drill bits will hold an edge longer
and will stand up to harder material.
Additional tooling
necessary for L15 locks
| Part# |
Description |
|
| LDS-3/32 |
drill stop
to use with 3/32" drill bits |
|
| LDS-3/16 |
drill stop
to use with 3/16" drill bits |
|
| L15JS |
drill jig
set for creating L15 hole pattern |
|
LNS drill stops are
used to control the depth of the lock hole patterns. This is a VERY
necessary step. Do not attempt to "eyeball" your lock hole
pattern depth. By allowing the drill bit to only penetrate to a
predetermined depth, many common drilling errors can be avoided.
The three-piece drill jig set
comes with locating pins. This part number should only be used as a
replacement. If you are just getting started with the L15 locks, go ahead
and purchase the kit. It is less expensive than buying all of the pieces
individually and comes in a black case that you can use to keep all of the
components in one place.
L15K (complete L15 Lock
Kit)
| Includes
these parts: |
Description: |
| L15B-10 |
10 each of
the L15 bottom locks |
| L15S-10 |
10 each of
the L15 surface locks |
| L15DB |
drill bit
set: 3 ea of 3/32" and 3/16" |
| L15JS |
drill jig
set for creating hole pattern |
| LDS-3/32 |
drill stop
for 3/32" drill bit |
| LDS-3/16 |
drill stop
for 3/16" drill bit |
| L750-2 |
60 ml of
tapping fluid |
| LHC623-20 |
20 ml of
lubricating sealant |
The L15 Lock Kit comes in a black plastic case that you can
use to keep all of the components in one spot. If you are getting started
with the L15 locks, purchasing the kit makes the most sense. It is less
expensive than buying all of the pieces individually.
L20 Lock and Tooling
This section shows you the part numbers and the U.S. prices for
L20 locks and their tooling. To learn about the capabilities of locks,
please review the Locks page.
Important note: Our part numbers reflect a package
quantity. Example: If you order L20S-5 you would receive a package
of 5 pieces of the L20 surface lock.
(If you are from outside the US, please contact us. We
ship direct to the US but have stocking distributors in other countries.)
Locks:
L20B, L20S
Drill Bits:
L20DB
Tooling:
Drill stops, Drill Jig Set
Kit: L20K
L20 Bottom Locks
| Part
# |
|
| L20B-10 |
|
| L20B-25 |
|
| L20B-50 |
|
| L20
Surface Locks |
| L20S-5 |
|
|
Additional tooling
necessary for L20 locks
| Part# |
Description |
|
| L20DB |
3 ea. of
fractional sizes 1/8" and 1/4" drill bits |
|
| LDS-1/8 |
drill stop
to use with 1/8" drill bits |
|
| LDS-1/4 |
drill stop
to use with 1/4" drill bits |
|
| L20JS |
drill jig
set for creating L20 hole pattern |
|
Tough Duty drill bits are made of high quality tool steel and
heat-treated to higher hardness. These drill bits will hold an edge longer
and will stand up to harder material.
LNS drill stops are used to control the depth of the
lock hole patterns. This is a VERY necessary step. Do not attempt to
"eyeball" your lock hole pattern depth. By allowing the drill
bit to only penetrate to a predetermined depth, many common drilling errors can
be avoided.
The three-piece drill jig set comes with locating pins.
This part number should only be used as a replacement. If you are just
getting started with the L20 locks, go ahead and purchase the whole kit.
It is less expensive than buying all of the pieces individually and comes in a
black case that you can use to keep all of the components in one place.
L20K
(complete L20 Lock Kit)
| Includes
these parts: |
Description: |
| L20B-10 |
10 each of
the L20 bottom locks |
| L20S-5 |
5 each of
the L20 surface locks |
| L20DB |
drill bit
set: 3 ea of 1/8" and 1/4" |
| L20JS |
drill jig
set for creating hole pattern |
| LDS-1/8 |
drill stop
for 1/8" drill bit |
| LDS-1/4 |
drill stop
for 1/4" drill bit |
| L750-4 |
4 ounces of
tapping fluid |
| LHC623 |
60 ml of
lubricating sealant |
The L20 Lock Kit comes in a black plastic case that you can
use to keep all of the components in one spot. If you are getting started
with the L20 locks, purchasing the kit makes the most sense. It is less
expensive than buying all of the pieces individually.
