L10 Lock and Tooling
(go to: L15/5 Lock and Tooling)
This section shows you the part numbers for
L10 locks and their tooling. (Pricing is being updated.) To learn about the capabilities of locks,
please review the Locks page.
Important note: Our part numbers reflect a package
quantity. Example: If you order L10B-25, you would receive a package
of 25 pieces of the L10 lock.
(If you are from outside the US, please contact us. We
ship direct to the US but have stocking distributors in other countries.)
Locks:
L10B, L10S
Drill Bits:
L10DB
Tooling:
Drill stops, Drill Jig Set
Kit: L10K
L10 Bottom Locks
| Part
# |
|
| L10B-10 |
|
| L10B-25 |
|
| L10B-50 |
|
|
L10 Surface Locks
| Part
# |
|
| L10S-10 |
|
| L10S-25 |
|
| L10S-50 |
|
|
Tough Duty Drill Bit Set for L10 Locks
| Part# |
Qty
& Description |
|
| L10DB |
3 each of
fractional sizes 1/16" and 1/8" drill bits |
|
Tough Duty drill bits are made of high quality tool steel and
heat-treated to higher hardness. These drill bits will hold an edge longer
and will stand up to harder material.
Additional tooling
necessary for L10 locks
| Part# |
Description |
|
| LDS-1/16 |
drill stop
to use with 1/16" drill bits |
|
| LDS-1/8 |
drill stop
to use with 1/8" drill bits |
|
| L10JS |
drill jig
set for creating L10 hole pattern |
|
LNS drill stops are
used to control the depth of the lock hole patterns. This is a VERY
necessary step. Do not attempt to "eyeball" your lock hole
pattern depth. By allowing the drill bit to only penetrate to a
predetermined depth, many common drilling errors can be avoided.
The three-piece drill jig set
comes with locating pins. This part number should only be used as a
replacement. If you are just getting started with the L10 locks, go ahead
and purchase the kit. It is less expensive than buying all of the
pieces individually and comes in a black case that you can use to keep all of
the components in one place.
L10K (complete L10 Lock
Kit)
| Includes
these parts: |
Description: |
| L10B-10 |
10 each of
the L10 bottom locks |
| L10S-10 |
10 each of
the L10 surface locks |
| L10DB |
drill bit
set: 3 ea of 1/16" and 1/8" |
| L10JS |
drill jig
set for creating hole pattern |
| LDS-1/16 |
drill stop
for 1/16" drill bit |
| LDS-1/8 |
drill stop
for 1/8" drill bit |
| L750-2 |
60 ml of
tapping fluid |
| LHC623-20 |
20 ml of
lubricating sealant |
The L10 Lock Kit comes in a black plastic case that you can
use to keep all of the components in one spot. If you are getting started with the L10 locks,
purchasing the kit makes the most sense. It is less expensive than buying all of the
pieces individually.
L15/5 Lock and
Tooling
This section shows you the part numbers and the U.S. price for
L15/5 locks and their tooling. To learn about the capabilities of locks,
please review the Locks page.
Important note: Our part numbers reflect a package
quantity. Example: If you order L10-25 you would receive a package
of 25 pieces of the L10 lock.
(If you are from outside the US, please contact us. We
ship direct to the US but have stocking distributors in other countries.)
Locks:
L15/5
Drill Bits:
L15/5DB
Tooling:
Drill stops, Drill Jig Set
Kit: L15/5K
L15/5
Locks
| Part
# |
|
| L15/5-10 |
|
| L15/5-25 |
|
| L15/5-50 |
|
|
Additional tooling
necessary for L15/5 locks
| Part# |
Description |
|
| L15/5DB |
3 each of
wire 15 drill bits |
|
| LDS-15 |
drill stop
to use with wire 15 drill bits |
|
| L15/5JS |
drill jig
set for creating L15/5 hole pattern |
|
Tough Duty drill bits are made of high quality tool steel and
heat-treated to higher hardness. These drill bits will hold an edge longer
and will stand up to harder material.
LNS drill stops are used to control the depth of the
lock hole patterns. This is a VERY necessary step. Do not attempt to
"eyeball" your lock hole pattern depth. By allowing the drill
bit to only penetrate to a predetermined depth, many common drilling errors can
be avoided.
The two-piece drill jig set comes with locating pins.
This part number should only be used as a replacement. If you are just
getting started with the L15/5 locks, go ahead and purchase the whole kit.
It is less expensive than buying all of the pieces individually and comes in a
black case that you can use to keep all of the components in one place.
L15/5K
(complete L15/5 Lock Kit)
| Includes
these parts: |
Description: |
| L15/5-10 |
10 each of
the L15/5 locks |
| L15/5DB |
drill bit
set: 3 ea of wire size 15 |
| L15/5JS |
drill jig
set for creating hole pattern |
| LDS-15 |
drill stop
for wire 15 drill bit |
| L750-2 |
60 ml of
tapping fluid |
| LHC623-20 |
20 ml of
lubricating sealant |
The L15/5 Lock Kit comes in a black plastic case that you can
use to keep all of the components in one spot. If you are getting started with the
L15/5 locks, purchasing the kit makes the most sense. It is less expensive than buying all of the
pieces individually.
