This page shows you the part numbers for our accessory kits. (Pricing is being updated.)
If you have arrived at this page and you are confused, here are some pages you can explore that should help explain our process and products: Metal Stitching, Products. If you still have questions, you can always pick up the phone and call 800-736-8261 or 209-632-2345 or send us an email.
(If you are from outside the US, please contact us. We ship direct to the US but have stocking distributors in other countries.)
L6269K: Introducing a sleeve system for diesel water passages in GM 6.2 & 6.5 and Navistar 6.9 & 7.3 cylinder heads.
L4XK and L6XK: Drill guide and tap extension kits to help you drill and tap at angles to the surface, such as down in the valve ports of cylinder heads.
The extension kits we produce contain a 4" long drill guide with handle, a 4" long tap extension and six 6" long split point drill bits. (Taps are not included; see Cutting Tools.)
The drill guide will help you start and drill holes at angles to the surface such as down in the valve ports of cylinder heads. Not only will you save time, but you will drill better holes and break fewer drill bits.
Each tap extension is designed with the same diameter as its corresponding drill guide. This assures that wherever you drill a hole with the drill guide, you will be able to tap the hole at the exact same angle with fewer broken taps and better tapped holes.
L4XK. Drill Guide & Tap Extension Kit
L6XK. Drill Guide & Tap Extension Kit
Send mail to
webmaster with questions or
comments about this web site.